by

Hirens Rescue Cd



Hirens

Last updated on May 7th, 2014

Hiren’s BootCD (HBCD) is a bootable CD that contains a set of tools that can help users to fix their computer if their system fails to boot. More specifically, HBCD contains hardware diagnostic programs, partition tools, data recovery utilities, antivirus tools and many other tools to fix your computer problems. I write this article because I use Hiren’s BootCD frequently to troubleshoot computer problems, specially when a computer doesn't boot anymore due to a virus attack or due to a corrupted file system.

A highly-customizable multiboot USB stick for modern PC Repair. This is a Live Rescue CD based on Debian, which we hope will eventually be good enough to replace Parted Magic. You need the Ultimate Boot CD if you want to: Run floppy-based diagnostic tools from CDROM drives. More and more PCs are shipped without floppy drives these days, and it is such a royal pain when you need to run diagnostic tools on them.

In this article you will find instructions on how to put Hiren’s BootCD on a USB flash drive (stick) in order to troubleshoot computer problems in the future.

How to create a Hiren's Boot USB Flash Drive.

Step 1. Download Hiren’s BootCD

1. Download Hiren’s BootCD to your computer.

(Hiren’s BootCD Official Download page: http://www.hirensbootcd.org/download/ )

Scroll the page down and click on “Hirens.BootCD.15.2.zip” )

2. When the Download is complete, right click on “Hirens.BootCD.15.2.zip” file to extract it.

Step 2: Download RUFUS USB Boot Creator Utility*.

* Rufus is an excellent utility that helps to create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc.

1. Go to the official Rufus download page and download RUFUS USB Bootable Creator Utility to your computer.

Step 3. Create a bootable Hiren’s BootCD USB flash drive.

1. Remove all USB storage drives from your computer and plug an EMPTY* USB stick (minimum 1GB) to an empty USB port.

Attention: DO NOT leave your files on USB stick, because all files will be erased during this operation.

2. Now double-click to run “rufus” application.

When Rufus utility starts:

3. Choose the empty USB stick that you plugged on your computer.

4. At “Create a bootable disk using” option, select “ISO Image”.

5. Then click the icon next to “ISO Image” entry to select the Hiren’s ISO Image file “Hiren's.BootCD.15.2”.iso Kavita serial wiki. ” from your computer.

6. Inside the “Hiren’s Boot 15.2” folder, select the “Hiren’s BootCD 15.2.iso” image file and choose “Open”.

7. When done press “Start”.

8. Read carefully the warning message and press “OK”.

Hiren

Wait until Rufus utility erases your USB stick and transfers Hiren’s Boot ISO files to it.

Resonance in series RLC Circuit. When the frequency of the applied alternating source (ω r) is equal to the natural frequency 1/ √(LC) of the RLC circuit, the current in the circuit reaches its maximum value. Then the circuit is said to be in electrical resonance. The frequency at which resonance takes place is called resonant frequency. FASOR DAN ELEMEN-ELEMEN DASAR RANGKAIAN LISTRIK. Diagram Fasor Arus dan Tegangan Rangkaian Seri R-L-C. Fasor berasal dari kata ”phase” dan ”vector” dalam bahasa inggris yang artinya adalah ”vektor fase”. Fasor digunakan untuk menyatakan besaran- besaran dalam arus bolak- balik, misalnya tegangan dan arus. Dari gambar diagram fasor terlihat bahwa antara tegangan dan arus terdapat beda sudut fase sebesar θ yang dapat dinyatakan dengan: Besarnya arus yang melewati rangkaian RLC adalah sama, sehingga besarnya tegangan pada masing masing komponen R, L, dan C dapat dinyatakan: V R = I. Diagram fasor rangkaian rlc.

9. When Rufus operation is completed, close Rufus utility, unplug the USB stick and use it in the future to troubleshoot your computer.

Notice: In order to boot from the Hiren’s Bootable USB stick, you must set the USB as first boot device from your BIOS settings.To do that:

  1. Power On your computer and press 'DEL' or 'F1' or 'F2' or 'F10' to enter BIOS (CMOS) setup utility.
    (The way to enter into BIOS Settings depends on the computer manufacturer).
  2. Inside BIOS menu, find the 'Boot Order' setting.
    (This setting is commonly found inside 'Advanced BIOS Features' menu).
  3. At “Boot Order” setting, set the USB-HDD as first boot device.
  4. Save and exit from BIOS settings.

That's it!

If this article was useful for you, please consider supporting us by making a donation. Even $1 can a make a huge difference for us in our effort to continue to help others while keeping this site free:
If you want to stay constantly protected from malware threats, existing and future ones, we recommend that you install Malwarebytes Anti-Malware PRO by clicking below (we do earn a commision from sales generated from this link, but at no additional cost to you. We have experience with this software and we recommend it because it is helpful and useful):

Full household PC Protection - Protect up to 3 PCs with NEW Malwarebytes Anti-Malware Premium!

Step 1
Connect USB Pen Drive (1GB or more)

Step 2
Download and Run USB Disk Storage FormatUSBFormat.zip (34KB)

Step 3
Download grubinst_guigrub4dos.zip (179KB) and Run as Administrator

Step 4
Insert the BootCD (10.3 or newer) in the CD Drive and Copy everything from CD to USB Flash Drive

Step 5
Copy grldr and menu.lst from grub4dos.zip (or from HBCD folder) to the usb drive

Step 6
Test Your USB Drive (read bottom of the page for troubleshoot)

Make sure you set your computer to boot from USB Flash Drive

To Enter the BIOS press the 'Del' button on your keyboard. Alternatives are'F1', 'F2', 'Insert', and 'F10'. Some PC's BIOS might even require a differentkey to be pressed. Commonly a PC will show a message like'Press [Del] to enter Setup' to indicate that you need to press the 'Del' key.Some AMI BIOS require you to enable the option 'USB Keyboard Legacy support'!

For AMI BIOS:

  • Go to 'Feature Setup'. 'Enable' these options: 'USB Function Support',
    'USB Function For DOS' and 'ThumbDrive for DOS'. Go to 'Advanced Setup'.
    Set the '1st Boot Device' to 'USB RMD-FDD'.
    Reboot the PC and it now should boot from the Usb Stick.
  • Go to 'USB Mass Storage Device Configuration'. Select 'Emulation Type'
    and set it to 'Harddisk'. Go to the 'Boot Menu' and set the '1st boot device' to 'USB-Stick'. Exit the BIOS, saving the changes.
    you can try 'Emulation Type' to 'Floppy' or 'Forced FDD'.

Hiren S Rescue Cd

For PHOENIX/AWARD BIOS: Timilai kunai pal mp3 song download.

  • Go to 'Advanced BIOS Features'. Go to the '1st Boot device' and set it to 'USB-ZIP'.

Troubleshoot

Hiren's Rescue Cd Review

If you cannot install grub4dos (or you get 'cannot run background program' message) then use syslinux to boot grub4dos

Hiren's Rescue Cd Iso


Hiren's Rescue Cd Series